PE plate

Share With:

PE plate may be filled talc, talc shape is a sheet, and therefore have a higher stiffness, dimensional stability and heat-resistance temperature, good reinforcing effect.

pe board after filling talc products prone spots, the solution are:
1. Do not fill proportion is too high, at around 20%.
2. talc do modification, adding titanate coupling agents, compatibility agents, such as PP or PE resin corresponding acid rod graft, can greatly improve the fill level and guarantee, pe plate and filler better miscibility. Meanwhile suitable lubricant additives and processing is also very important.

PE sheet foam polyethylene plastic pellets made with unsurpassed sound absorption across the single, resistance to water penetration and air off gas flow capacity, low water absorption, low thermal conductivity.