• Solar Tracker Bearings

    Solar Tracker Bearings

    Solar Tracker Bearings – Finding the Right Polymer Solution
    1.Self lubrication – since the volumes of these bearings tend to be large, it may not always be possible to lubricate the mechanism regularly. In such a case, self-lubricating bearings are ideal.
    2.Lightweight – as mentioned above, solar plants rely on pockets of sunlight in which they can effectively generate energy. Hence, the aim to maximize the output when the plant is functional is critical to the financial viability of the system. One way to do this is to use materials that place as little load on the mechanisms as possible
    3.UV and weather resistant – It goes without saying that any component used in a solar tracker system will be exposed to generous amounts of sunlight. In addition to this, the effects of rain and general weathering would also need to be accommodated. Plants are usually set up with a time horizon of at least 25-30 years. It is reasonable to assume that a good bearing solution will not need replacement during this time frame.
    4.Wear resistance – again, the constant movement of the system entails a wear resistance bearing that will not yield during the life of the plant.
    5.Cost effective – finally, the volume of bearings required in a single plant can be up to 2000 pieces per Mega-watt. This means that cost is also a criterion that must be looked into when designing the same.

  • UHMWPE Bushing Supplier

    UHMWPE Bushing

    UHMWPE bushing has features and benefits like lower coefficients of friction compared to bronze, reduced wear on shaft/mating parts etc.

*Describe Your Buying Requirements in Detail

*Your email:

Inquiry
Email:
Name:
Message: